Shelving rack RX
A shelving system is suitable to store goods of any kind and any quantity. This system consists of very universal shelf types. The advantage of a shelving rack as plug system is obvious: no expensive and complex installation required - instead the shelves are installed quickly and easily without the hassle of screws.
System features of shelving racks
RX
The shelving rack consists of three basic elements:
- stable, eightfold edged frame profile, 35 mm wide
- through-running two-hook shelf support in various widths
- shelf composed of 100, 200, 300 and 400 mm wide panels, edged on all sides
The shelf height can easily be adjusted to the stored goods in increments of 25 mm. Subsequent changes or reinforcement to the shelves is possible at any time.
The depth can be varied by replacing the shelf supports using the existing panels.
The pluggable design guarantees short assembly times.
An extensive range of accessories is available for the ELVEDI RX 25 shelving system to provide flexible solutions through to the construction of multi-storey installations.
Accessories Shelf rack RX
Shelf dimensions
shelf frame From two frame profiles and
at least two plugged rack carriers.
Punching pitch every 25 mm.
|
High: |
2000 / 2500 / 3000 / 3500 / 4000 mm
|
Width: |
320 / 420 / 520 / 620 / 720 / 820 mm |
|
Shelf Composed of all-
Edged panels,
30 mm high, 100, 200, 300
and
400 mm wide. Long side triangulated. |
Length: |
533 / 683 / 833 / 983 / 1133 / 1283 mm
|
|
Rear wall made of steel sheet with
several lateral edges. |
High: |
400 und 500 mm |
Length: |
558 / 708 / 858 / 1008 / 1158 / 1308 mm
(axle dimensions) |
|
Side wall steel sheet in the rack
mountable. |
High: |
1000 und 1500 mm |
Length: |
300 / 400 / 500 / 600 / 700 / 800 mm |
|
Cross stay from two centrally connected
flat belts including screw material. |
Length: |
1790 mm |
|
Other dimensions on request.
Finish steel sheet. |